Wacom Cintiq Pro 32 Manual page 24

The previous figure shows session statistics for devices that can support four connected displays.
If your deployment only supports two displays, information for these two displays will appear in
the bottom area of the page.
AWI Home Page Statistics
Statistics
Processor
Time Since Boot
PCoIP Device Name
Connection State
Connection Duration
802.1X Authentication
Status
Session Encryption
Type
PCoIP Packets
Statistics
© 2020 Teradici
AWI Home Page
Description
PCoIP processor type, version, and RAM size
Length of time that the PCoIP processor has been running.
The logical name for the device.
This field is the name the client registers with the DNS server if DHCP is enabled or the
system is configured to support registering the hostname with the DNS server. (See the
PCoIP Device Name parameter on the Label page.)
The current (or last) state of the PCoIP session. Possible connection states are:
• Asleep
• Canceling
• Connected
• Connection Pending
• Disconnected
• Waking
Displays the length of time the device has been connected to a host endpoint.
Indicates whether 802.1x authentication is enabled or disabled on the device.
Displays the encryption algorithm in use when a session is active.
PCoIP Packets Sent: The total number of PCoIP packets sent in the current/last session.
PCoIP Packets Received: The total number of PCoIP packets received in the current/last
session.
PCoIP Packets Lost: The total number of PCoIP packets lost in the current/last session.
24