Table of Contents
Advertisement
3. In the Endpoint Manager URI for Direct Connect section, find the Internal URI field and type the
endpoint manager's URI. You can also provide an external URI, if needed.
Endpoint manager URI must use a secured WebSocket prefix
URIs are in this format and require a secured WebSocket prefix:
wss://<internal EM IP address/FQDN>[:port number]
The PCoIP Management Console's listening port is 5172. If you omit the port number, port 5172 will be used by
default.
4. Click Apply.
After the Tera2 PCoIP Zero Client discovers the endpoint manager, the endpoint manager topology
appears on the Management page.
© 2020 Teradici
Discovering the Endpoint Manager Manually from the Client Using High Security Mode
206
Advertisement
Table of Contents
