Wacom Cintiq Pro 32 Manual page 283

Parameter
Enable IPv6
Link Local Address
Gateway
Enable DHCPv6
DHCPv6 Addresses
(AWI only)
Primary DNS
Secondary DNS
Domain Name
FQDN
Enable SLAAC
SLAAC Addresses
(AWI only)
Enable Manual
Address
Manual Address
(OSD only)
© 2020 Teradici
Configuring IPv6 Network Settings
Description
Select the check box to enable IPv6 for your PCoIP devices.
This field is automatically populated.
Enter the IPv6 gateway address.
Select the check box to set up Dynamic Host Configuration Protocol version 6 (DHCPv6)
for your device.
When DHCPv6 is enabled and the device is rebooted, the server automatically populates
these fields with addresses for the device.
The device's primary DNS IP address. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
The device's secondary DNS IP address. If DHCPv6 is enabled, this field is automatically
populated by the DHCPv6 server.
The domain name used (for example, domain.local) for the client. If DHCPv6 is enabled,
this field is automatically populated by the DHCPv6 server.
The fully qualified domain name for the client. If DHCPv6 is enabled, this field is
automatically populated by the DHCPv6 server.
Select the check box to set up Stateless Address Auto-configuration (SLAAC) for your
devices.
When SLAAC is enabled and the device is rebooted, these fields are automatically
populated.
Select this check box to set up a manual (static) address for the device.
Enter the IP address for the device.
283