Wacom Cintiq Pro 32 Manual page 292

Parameter
Display
Suspend
Timeout
Auto Power-
Off Timeout
Remote Host
Power Control
Power On
After Power
Loss
Enable Wake-
on-USB
© 2020 Teradici
Description
Configure the number of seconds to wait after a period of inactivity (that is, no keyboard or
mouse action) before the client puts its attached displays into low power mode. Valid values are
10 to 14400 seconds, or use 0 to disable the feature.
This timeout only applies when the device is in session.
When connected to a workstation, this feature requires you to enable the local mouse and
keyboard feature. For more information about this feature and instructions on how to enable it,
see the PCoIP® Host Software for Windows User
Configure the number of seconds to wait after a period of inactivity (that is, no keyboard or
mouse action) before the client powers down. Valid values are 60 to 28800 seconds, or use 0 to
disable the power down.
Non-zero values are only enabled when the Tera2 PCoIP Zero Client supports powering off.
This timeout only applies when the device is not in session.
Configure the client's remote power setting.
Select from the following options:
• Power-off not permitted: Users can't remotely shut down the host PC from the Tera2 PCoIP
Zero Client. When you select this option, the Zero Client Control Panel overlay window
doesn't appear when you press the Tera2 PCoIP Zero Client's Connect/Disconnect button.
• Hard Power-off only: Users are able to remotely shut down the host from the Tera2 PCoIP
Zero Client. When this option is selected, the Zero Client Control Panel overlay window
appears when you press the Tera2 PCoIP Zero Client's Connect/Disconnect button.
For more information about the Zero Client Control Panel overlay window, see
from a Session.
When enabled, the client automatically powers back on when power is supplied.
When enabled, configures the client to power up when the user presses a key on the keyboard.
Wake-on-USB applies when the client is either powered off automatically or as a result of the
user holding down the power button.
Clicking or moving the mouse won't power up the client when this feature is enabled.
Configuring Power Settings
Guide.
Disconnecting
292