Table of Contents
Advertisement
AWI Display page
To initiate a test pattern:
1. From the AWI, select Diagnostics > Display.
2. From the AWI Display page, do the following:
• From the Test mode list, select the type of test pattern to display on the Tera2 PCoIP Zero
Client's attached display(s).
• From the Test resolution list, select the test resolution to use.
• Click Start to display a test pattern on the Tera2 PCoIP Zero Client's attached display(s).
Click Stop to stop the test.
© 2020 Teradici
Testing Attached Displays
396
Advertisement
Table of Contents
