Wacom Cintiq Pro 32 Manual page 27

AWI Recovery Mode
Recovery mode is a special mode of the Tera2 PCoIP Zero Client firmware that takes effect when
the client experiences a problem that renders it unable to operate. Recovery mode automatically
becomes active under the following conditions:
• A firmware update fails.
• The client has an invalid configuration.
• The client has been unable to complete its boot sequence after a number of attempts.
This mode lets you correct the configuration, or upload a replacement firmware or certificate file.
When the client is in recovery mode, the following AWI login screen displays when you enter the
client's IP address in your browser's address bar:
AWI recovery mode
© 2020 Teradici
AWI Recovery Mode
27