Parameter
Syslog Facility
© 2020 Teradici
Performing Logging Tasks from the AWI
Description
The facility is a number attached to every syslog message. The number categorizes the
source of the syslog messages. The facility is part of the standard syslog header and all
syslog servers can interpret it.
Enter a facility to suit your logging needs. For example, you could configure devices as
follows:
• Zero clients to use facility 19
• Cisco routers to use facility 20
• VMware ESX hosts to use facility 21
The default facility is set to '19 – local use 3'. Cisco routers default to '23 – local use 7'.
370