Table of Contents
Advertisement
Statistics
Bytes
Round Trip Latency
Bandwidth Statistics
Pipeline Processing
Rate
Endpoint Image
Settings In Use
Initial Image Quality
Image Quality
Preference
Build to Lossless
Display
Maximum Rate:
Refresh Rate
© 2020 Teradici
AWI Home Page
Description
Bytes Sent: The total number of bytes sent in the current/last session.
Bytes Received: The total number of bytes received in the current/last session.
The minimum, average, and maximum round-trip PCoIP system and network latency in
milliseconds (± 1 ms).
Transmit Bandwidth: The minimum, average, and maximum traffic transmitted by the Tera
processor. The active bandwidth limit is the maximum amount of network traffic the
Tera processor may currently generate. The value is derived from the configured
bandwidth parameters and the current (or last) network congestion levels.
Receive Bandwidth: The minimum, average, and maximum traffic received by the Tera
processor.
Shows the average and maximum amount of image data being processed by the image
engine (in megapixels per second).
Displays if the image settings being used are configured within the client or within the
host. This is based on how the Use Client Image Settings field is configured on the
Image page for the host device.
The minimum and maximum quality setting is taken from the Image page for the
device.
The active setting is what's currently being used in the session and only appears on the
host.
This setting is taken from the Image Quality Preference field on the Image page. The
value determines if the image is set to a smoother versus a sharper image.
Options that may appear in this field include the following:
Enabled: The Disable Build to Lossless field on the Image page is unchecked.
Disabled: The Disable Build to Lossless field is checked.
The port number for the display.
This column shows the refresh rate of the attached display.
If the Maximum Rate field on the Image page is set to 0 (that is, there is no limit), the
maximum rate is taken from the monitor's refresh rate.
If the Maximum Rate field on the Image page is set to a value greater than 0, the refresh
rate shows as User Defined.
25
Advertisement
Table of Contents
