Table of Contents
Advertisement
AWI Network page
The following parameters display on the OSD and AWI Network pages:
Network Parameters
Parameter
Enable DHCP
IP Address
© 2020 Teradici
Configuring IPv4 Network Settings
Description
When enabled, the device contacts a DHCP server to be assigned an IP address, subnet
mask, gateway IP address, and DNS servers, and also requests a domain name (option
15), host name (option 12), and client Fully Qualified Domain Name (FQDN).
When disabled, you must set these parameters manually.
The device's IP address. If DHCP is disabled, you must set this field to a valid IP address. If
DHCP is enabled, you cannot edit this field.
276
Advertisement
Table of Contents
