Wacom Cintiq Pro 32 Manual page 161

Connecting to a Session
The OSD enables users to create a PCoIP session between the client and a remote resource by
clicking the green Connect button in the center of the Connect window.
Connecting to a Session from the Connect Window
1. Enter the requested information (for example, server name or IP address for Auto Detect,
PCoIP Connection Manager, View Connection Server, and Connection Management Interface
connection types), and click Connect. If your Tera2 PCoIP Zero Client is configured to cache
servers in Last servers used mode, this server name will subsequently appear in the Server
drop-down list after a successful connection is made.
2. If you have already connected to a server, it will appear in the Server drop-down list if your
Tera2 PCoIP Zero Client is configured to connect to this server or if it is configured to cache
servers in Last servers used mode. Select the server from the drop-down list and click Connect.
3. If your Tera2 PCoIP Zero Client is configured to connect directly to a PCoIP Remote
Workstation Card, you only need to click Connect.
The Connect window differs slightly depending on the session connection type you configure. The
following examples show the Connect window for the Auto Detect and Direct to Host session
connection type.
© 2020 Teradici
Connecting to a Session
161