Wacom Cintiq Pro 32 Manual page 436

Supported Smart Cards and USB Smart Card Readers for Tera2 PCoIP Zero Clients Connected to PCoIP Connection Managers
The communication protocol between the smart card and the reader is referred to as T=X, where X
is 0 or 1. Firmware 3.2.0 and higher supports T=0. Firmware 3.4.0 and higher supports T=1.
Support for additional smart card variants will be added to future firmware releases.
Pre-session smart card authentication to remote workstations using PCoIP Remote Workstation
Cards is not supported at this time.
Supported Smart Cards and USB Smart Card Readers for Tera2
PCoIP Zero Clients Connected to PCoIP Connection Managers
When used with a PCoIP Connection Manager that supports ID card authentication, the firmware
securely transfers the attached ID card identifier to the PCoIP Connection Manager before a
session is established.
Virtual Desktop Requirements
• Tera2 PCoIP Zero Client firmware 5.4 or later
• Teradici PCoIP Multi-Session Agent running on Windows Server 2016
Supported USB Smart Card Readers
• Gemalto IDBridge CT30 (legacy name: PC USB TR and PC TWIN)
• Rocketek RT-SCR1
Supported Smart Card Models
Teradici has tested these specific smart card models:
• Enhanced BasicCard
• Payflex Smart Card
• Open Platform Smart Card
© 2020 Teradici 436