Table of Contents
Advertisement
Using the Packet Capture Tool
Setting
Start (a button)
Download (a link)
The AWI Packet Capture page, as shown next, provides a diagnostic tool to capture network
packets on the Tera2 PCoIP Zero Client. Using the packet capture tool may be requested by
Teradici support.
AWI Packet Capture page
PCoIP traffic isn't included in the Packet Capture
PCoIP traffic is not included in the packet capture. All other network traffic, is captured.
The following parameters display on the AWI Packet Capture page:
Parameters
Packet Capture
Status
© 2020 Teradici
Using the Packet Capture Tool
Default
AWI
OSD
Description
Displays the status of the packet capture tool. Values include: - Idle: Packet capture has not
been initiated. - Running: Packet capture is in progress. - Stopped: Packet capture has been
stopped.
Management Console
397
Advertisement
Table of Contents
