Wacom Cintiq Pro 32 Manual page 39

Connecting the Tera2 PCoIP Zero Client to the
Network
To connect the Tera2 PCoIP Zero Client:
1. Connect a USB keyboard and mouse to any of the Tera2 PCoIP Zero Client USB ports.
2. Connect one end of the Ethernet cable to the Tera2 PCoIP Zero Client and the other end to a
switch/router. The switch or router should be on the same network as the Remote
Workstation Card or virtual desktop server if there is not a PCoIP Management Console that is
managing the pcoip endpoints.
3. Connect monitor cables to the Tera2 PCoIP Zero Client.

Connect monitors using correct ports
To ensure the best experience, connect monitors to the zero client ports in sequential order
© 2020 Teradici
Connecting the Tera2 PCoIP Zero Client to the Network
39