Wacom Cintiq Pro 32 Manual page 365

Parameter
Syslog Facility

Detailed information about the AWI Event Log page
For more information about the settings on the AWI Event Log page, including information about syslog settings, see
Performing Logging
To configure syslog settings:
1. From the AWI, select Diagnostics > Event Log.
2. From the AWI Event Log page, do the following:
• Select the Enable Syslog check box.
• For Identify Syslog Host By, select whether you want to identify the syslog server by its IP
address or FQDN.
• In the Syslog Host IP Address / Syslog Host DNS Name box(es), enter the IP address or FQDN
of the syslog server.
• If the syslog server is configured to receive data on a port other than 514, enter another
port number in the Syslog Host Port box.
• If you want the device to use a facility other than the default facility, select it from the
Syslog Facility list.
• Click Apply.
3. From the Success page, click Continue.
© 2020 Teradici
Description
The facility is a number attached to every syslog message. The number categorizes
the source of the syslog messages. The facility is part of the standard syslog header
and all syslog servers can interpret it.
Enter a facility to suit your logging needs. For example, you could configure devices as
follows:
• Zero clients to use facility 19
• Cisco routers to use facility 20
• VMware ESX hosts to use facility 21
The default facility is set to 19 – local use 3.
Cisco routers default to 23 – local use 7.
Tasks.
Enabling Syslog
365