Wacom Cintiq Pro 32 Manual page 67

Disconnect
Message Filter
© 2020 Teradici
OSD: Direct to Host + SLP Host Discovery Session Settings
This field lets you control what type of messages appear when a session is disconnected.
There are three categories:
Information: User- or administrator-initiated actions affecting the session:
• You have been disconnected because you logged in from another location or your host
was shut down or restarted.
• You have been disconnected because an administrator disconnected you.
• You have been disconnected because you logged in from another location.
• You have been disconnected because you disconnected from your workstation.
Warning: System-initiated, but expected actions affecting the session:
• You have been disconnected because your session timed out.
Error: Unexpected system-initiated actions causing session to fail:
• You have been disconnected.
• Unable to connect (0x1001). Contact your IT administrator.
• Unable to connect (0x1002). Contact your IT administrator.
• Session closed remotely.
• Session closed remotely (unknown cause).
• You have been disconnected due to a configuration error (0x100). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x201). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x300). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x301). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x302). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x303). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x305). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x400). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x401). Contact your IT
administrator for assistance.
• You have been disconnected due to a configuration error (0x402). Contact your IT
administrator for assistance.
67