Wacom Cintiq Pro 32 Manual page 406

management software is the PCoIP Management Console. For information about the PCoIP
Management Console, see the
Q: How do I find my Tera2 PCoIP Zero Client's IP Address?
A: The Tera2 PCoIP Zero Client's address displays in the IP Address field when you select Options >
Information > Network or Options > Configuration > Network from the client's OSD.
For more information, see How to Assign an IP Address to a PCoIP Zero
address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?
Q: How do I update the Tera2 PCoIP Zero Client firmware?
A: The firmware version that is currently installed in your Tera2 PCoIP Zero Client displays in the
Firmware Version field when you select Options > Information from the client's OSD or Info > Version
from the client's AWI. For instructions on how to upload a different firmware release version, see
How to Upload Firmware to a PCoIP Zero
Q:What hosts can a Tera2 PCoIP Zero Client connect to?
A: Tera2 PCoIP Zero Clients are pre-configured to connect directly to PCoIP Connection Manager
or VMware Horizon brokers, but you can easily configure them for any session connection type.
Tera2 PCoIP Zero Clients can connect to PCoIP Remote Workstation Cards, Teradici Cloud Access
Software, Teradici Cloud Access Platform desktops and workstations, Amazon WorkSpaces
Desktops, and VMware Horizon Desktops. For more information, see
Using Your Tera2 PCoIP Zero
Q: What devices can I attach to my Tera2 PCoIP Zero Client?
A: You can attach the following devices:
• Monitors: Depending on the Tera2 PCoIP Zero Client model, you can attach up to four monitors.
• Analog devices: You can attach analog output devices such as headphones and speakers to the
Tera2 PCoIP Zero Client's analog output (line out) jack, and analog input devices such as
microphones and recording devices to the client's analog input (line in) jack.
• USB devices: You can attach a variety of USB devices to your Tera2 PCoIP Zero Client. USB
human interface device (HID) devices (for example, keyboards, mice, Wacom tablets) are
locally terminated by the client. Non-HID devices (for example, mass storage devices, some
printers, non-isochronous scanners) are automatically bridged when the USB permissions are
© 2020 Teradici
Frequently Asked Questions
PCoIP® Management Console Administrators'
Client.
Client?.
Guide.
ClientHow do I find the IP
(1360).
What Can You Connect To
406