Wacom Cintiq Pro 32 Manual page 184

Connecting to Amazon WorkSpaces using the PCoIP Connection Manager for Amazon
WorkSpaces
PCoIP Connection Manager for Amazon WorkSpaces is required to connect to Amazon
WorkSpaces when using PCoIP Zero Clients with firmware releases older than 6.0. You will need to
know the IP address of your PCoIP Connection Manager for Amazon WorkSpaces appliance when
using this connection type.

Using the correct firmware
Teradici recommends directly connecting to Amazon WorkSpaces when using PCoIP Zero Clients with firmware 6.0
or newer.

Type 'https://' before the IP address or fully qualified computer name
The syntax of the Server URI (uniform resource identifier) field on the Session page requires https:// before the IP
address or FQDN. If you do not enter it, https:// will automatically be inserted when you click OK.
Connecting Using Auto Detect
This connection type automatically detects which broker protocol a connection server is using so
users in a mixed environment (for example, one that uses View Connection Servers and PCoIP
Connection Managers) do not have to manually reconfigure the session type each time they
switch brokers.
To connect using the Auto Detect connection type:
1. From the Options > Configuration > Session menu on the Tera2 PCoIP Zero Client's OSD, select
the Auto Detect
2. In the Server URI field, enter the IP address of your PCoIP Connection Manager for Amazon
WorkSpaces, and click OK.
3. Click the Connect button.
4. When prompted, enter your login credentials.
© 2020 Teradici
Connecting to Amazon WorkSpaces using the PCoIP Connection Manager for Amazon WorkSpaces
connection type.
184