Wacom Cintiq Pro 32 Manual page 49


Remote Workstation Certificate
Ensure the desired trusted certificate is uploaded to the Remote Workstation Card certificate store.
2. Select Direct to Host for the Session Connection Type on the Session page.
3. Enter the DNS Name or IP Address of the Remote Workstation Card that you are going to have
a peer-to-peer connection with.
4. Select Show Advanced Options.
5. Select the TLS Security Mode option Suite B: TLS 1.2 with Suite B-compliant 192-bit elliptic curve
encryption.
6. Select the correct Peer-to-Peer Certificate. (If it is not displayed, you have not yet uploaded it to
the certificate store)
7. Select Apply.
© 2020 Teradici
Peering Zero Clients to Remote Workstation Cards
49