Wacom Cintiq Pro 32 Manual page 308

Device ID parameters
The following parameters display when you authorize or unauthorize USB device parameters:
USB Authorized/Unauthorized Devices Parameters
Parameter Description
Add new When adding a new USB authorization or unauthorization entry, select one of the following:
Device This field is enabled when Class is selected.
Class Select a supported device class from the drop-down menu, or select Any to authorize or unauthorize
(disable) any device class.
Sub Class This field is enabled when Class is selected.
Select a supported device sub class from the drop-down menu, or select Any to authorize or
unauthorize (disable) any sub-class.
Protocol This field is enabled when Class is selected.
Select a supported protocol from the drop-down menu, or select Any.
Vendor ID This field is enabled when ID is selected.
Enter the vendor ID of the authorized (or unauthorized) device. The valid range is hexadecimal 0-
FFFF.
Protocol ID This field is enabled when ID is selected.
Enter the product ID of the (authorized or unauthorized) device. The valid range is hexadecimal 0-
FFFF.
The following figure shows the parameters that display when you add a new USB bridged entry.
© 2020 Teradici
Configuring USB Permissions from the AWI
• Class: The USB device is authorized by its device class, sub-class, and protocol information.
• ID:The USB device is authorized by its vendor ID and product ID information.
308