Wacom Cintiq Pro 32 Manual page 156

Parameter
Certificate
Check Mode
Lockout
Trusted View
Connection
Servers
Remember
Username
Use OSD Logo
for Login
Banner
Prefer GSC-IS
Enable Peer
Loss Overlay
Enable
Preparing
Desktop
Overlay
Enable
Session
Disconnect
Hotkey
© 2020 Teradici
AWI: View Connection Server + Imprivata OneSign Session Settings
Description
When enabled, prevents users from changing the Certificate Check Mode settings from the OSD or
AWI.
Click the Show button to display View Connection Servers for which the client has received a valid
certificate.
Click the Clear button to clear this cache.
When enabled, the user name text box automatically populates with the last username entered.
When enabled, the OSD logo banner appears at the top of login screens in place of the default
banner.
When enabled, if a smart card (CAC) supports more than one interface such as GSC-IS and PIV
then GSC-IS is used. However in the case where the card supports both GSC-IS and PIV, and only
PIV objects are configured on the card then the connection may fail. If this is the case uncheck
the box and retest. If a smart card supports only one interface, such as either GSC-IS or PIV
endpoint, then only the GSC-IS or PIV endpoint interface is used regardless of this setting. This
only affects smart card access performed outside of PCoIP sessions.
When enabled, the 'Network Connection Lost' overlay appears on the display(s) when a loss of
network connectivity is detected. Normal hypervisor scheduling delays can falsely trigger this
message.
When enabled, the 'Preparing Desktop' overlay appears on the display(s) when users log in.
This overlay provides assurance that login is proceeding if the desktop takes more than a few
seconds to appear.
When enabled, users can press the
Client Control Panel' overlay, which lets them disconnect the current session on the workstation
or power off the workstation.
Before users can use this disconnect hotkey sequence, certain other configuration options must
be in place. See Disconnecting from a Session for details.
+ hotkey sequence to pop up the 'Zero
Ctrl Alt F12
+
156