Table of Contents
Advertisement
To Force an AWI Password Change
When this option is selected, a new password is required when you next access your zero client
AWI.
1. From the OSD, select Options > Configuration > Access.
2. Select the Force password change on next login: option.
3. Click Apply and then OK to save your changes in the OSD.
The Require password protection for User Settings setting cannot be configured from the OSD
therefore the following steps are from the AWI. When Require password protection for User Settings is
selected, the Zero Client AWI password is required to change any settings located in OSD > User
Settings.
To Require a Password for OSD User Settings
1. Ensure there is a password applied to the zero client. See
2. From an enabled AWI, select Options > Configuration > Access.
3. Enable the Require password protection for User Settings option.
4. Click Apply and then OK to save your changes in the OSD.
© 2020 Teradici
To Force an AWI Password Change
Configuring OSD and AWI Password
247
Advertisement
Table of Contents
