Wacom Cintiq Pro 32 Manual page 306

The factory defaults have no USB permissions configured on the host. The factory defaults for the
client USB permissions are 'any, any, any' (that is, authorized USB devices). Depending on the host
implementation (for example, hardware PCoIP host or software PCoIP host), you can configure the
USB permissions as required on the client and/or host.
The host USB permissions are only updated at the start of a PCoIP session. They are authorized in
the following order of priority (from highest to lowest):
• Unauthorized Vendor ID/Product ID
• Authorized Vendor ID/Product ID
• Unauthorized Device Class/Sub Class/Protocol
• Authorized Device Class/Sub Class/Protocol
The following parameters display on the AWI USB permissions page:
AWI USB Permissions Parameters
Parameter
Authorized
Devices
Unauthorized
Devices
© 2020 Teradici
Configuring USB Permissions from the AWI
Description
Specify the authorized USB devices for the device:
Add New: add a new device or device group to the list. This enables USB authorization by ID or
Class:
• ID: The USB device is authorized by its Vendor ID and Product ID.
• Class: The USB device is authorized by Device Class, Sub Class, and Protocol.
Remove: Delete a rule for a device or device group from the list.
Specify the unauthorized USB devices for the device.
Add New: add a new device or device group to the list. This enables USB unauthorization by ID or
Class:
• ID: The USB device is unauthorized by its Vendor ID and Product ID.
• Class: The USB device is unauthorized by Device Class, Sub Class, and Protocol.
Remove: Delete a rule for a device or device group from the list.
306