Table of Contents
Advertisement
Category
Parameter
Subnet Mask
Gateway
Primary DNS Server
Secondary DNS Server
You can also configure network settings from the OSD and AWI Network and Audio pages
You can configure the initial setup settings, as well as other network settings, from the OSD and AWI Network pages.
To configure network settings from these pages, see
Session Parameters
Session parameters are configured from the AWI Configuration -> Session page.
To configure initial setup parameters from the AWI:
1. From the AWI, select Configuration > Initial Setup.
2. From the AWI Initial Setup page, configure audio, and network parameters.
3. Browse to Configuration > Session and select your preferred session type.
4. Click Apply to save your configuration.
© 2020 Teradici
Configuring Initial Setup Parameters
Description
Device's subnet mask
Device's gateway IP address
Device's primary DNS IP address
Device's secondary DNS IP address
Configuring Audio
and
Configuring Network
Settings.
42
Advertisement
Table of Contents
