Wacom Cintiq Pro 32 Manual page 126

Parameter
Connection
Server Cache
Mode
Auto Launch If
Only One
Desktop
Use OSD Logo
for Login
Banner
Enable Peer
Loss Overlay
Enable
Preparing
Desktop
Overlay
Enable Session
Disconnect
Hotkey
© 2020 Teradici
AWI: PCoIP Connection Manager + Auto-Logon Session Settings
Description
This field determines whether a connection server is dynamically added to the Server drop-down
menu on the OSD Connect page when a user types in a valid server URI, or whether it appears in
a read-only list for the user to select.
• Last servers used: Select this option if you want a list of cached servers that a user has typed
in to appear in the Server drop-down menu on the OSD Connect page.
• Read-only: Select this option if you want users to select a connection server from a read-only
list.
You can use the PCoIP Management Console to pre-populate the list of available connection
servers.
When enabled, users are automatically connected to a provisioned desktop after user
credentials are entered.
This feature only applies to users who are entitled to a single desktop. It does not apply to users
entitled to multiple virtual desktops.
When enabled, the OSD logo banner appears at the top of login screens in place of the default
banner.
When enabled, the 'Network Connection Lost' overlay appears on the display(s) when a loss of
network connectivity is detected. Normal hypervisor scheduling delays can falsely trigger this
message.
When enabled, the 'Preparing Desktop' overlay appears on the display(s) when users log in.
This overlay provides assurance that login is proceeding if the desktop takes more than a few
seconds to appear.
When enabled, users can press the
Client Control Panel' overlay, which lets them disconnect the current session on the workstation
or power off the workstation.
• Before users can use this disconnect hotkey sequence, certain other configuration options
must be in place. See
+ +
Ctrl Alt F12
Disconnecting from a Session
hotkey sequence to pop up the 'Zero
for details.
126