Set Up The Instrument - Thermo Scientific NanoDrop OneC User Manual

4
Learning Center

Set Up the Instrument

Set Up the Instrument
Power on/off
Connect Power
Connect an Accessory
Set Up Bluetooth Connections
C
48 NanoDrop One with NanoDropQC Software User Guide
CAUTION Avoid shock hazard. Each wall outlet used must be equipped with a ground.
The ground must be a noncurrent-carrying wire connected to earth ground at the main
distribution box.
Connect the provided power cord to a grounded wall outlet. See
for more information.
To connect a compatible printer or other compatible accessory such as a USB keyboard
and/or mouse to the instrument, use any USB port on the instrument (front, back-left or
back-right). See Accessories
NanoDrop One instruments.
Use Bluetooth™ to connect the instrument to one or more Bluetooth (wireless) input devices
such as a Bluetooth keyboard, mouse or barcode scanner.
for information about accessories compatible with the
USB-A (2)
Ethernet
Power
"Power Cords" on page 137
Thermo Scientific