Run Time Events; Operating Sequences How To Set Up The Instrument Editing Run Time Events - Thermo Scientific FOCUS GC Instruction Manual

Chapter 11
Getting Started

Run Time Events

This option allows you to program events to happen prior to or during a run.
The following tables are showing two
entries and one with one entry.
The event shown in the loaded menu concern the detector, it adjusts the detector
Range to the lowest sensitivity during the PrepRun step.
You can program events like this shown with the
Up to 16 events may be programmed.
OPERATING SEQUENCE
Editing Run Time Events
Creating a Run Time Event
Use the following sequence to enter new run time events.
1. In main Menu move the cursor until
202

RUN TIME EVENTS

<none>
Add run time event
Run Time Events menu without
entries
Scroll to
Run time Events
menu.
RUN TIME EVENTS
RUN TABLE (1 of 1)
PreRun Det Azero
Add run time event
Clear run time event
Run Time Events menu with
RUN TIME
is selected, then press ENTER.
Others
, then press ENTER to open
Run Time Events
menus, one without
one entry
menu and submenu.
RUN TIME EVENTS
Instruction Manual