Installing An Unheated Valve For Liquid Sample Into The Unheated Compartment - Thermo Scientific TRACE 1300 Instruction Manual

Installing an Unheated Valve for Liquid Sample into the Unheated Compartment

Thermo Scientific
Figure 90. Unheated Diaphragm Valve Installation (5)
4. Connecting the gas line.
a. By using the proper nuts and ferrules connect the gas line from the solenoid valve
manifold to the diaphragm valve. See
Figure 91. Unheated Diaphragm Valve Installation (6)
 To install a valve for liquid samples in the unheated compartment
Note The installation of the valve for liquid samples requires the use of the fixing
clamp ring and the proper rotary valve for the actuation.
Installing valves in the unheated compartment consists of the following steps:
• Installing the rotary valve on the mounting bracket
• Installing the valve for liquid samples on the mounting bracket
• Installing the assemble into the unheated compartment under the main oven
Installing Valves and Fittings in the Unheated Compartment
Events Connector J24
Figure 91.
Fixing Dowel
Clamp Ring
Valve for Liquid Sample
TRACE 1310 Auxiliary Oven Instruction Manual
3
Components Installation
63