Snmp-Agent Trap Enable Ospf - HP FlexNetwork 3600 v2 Series Command Reference Manual

snmp-agent trap enable ospf

Syntax
snmp-agent trap enable ospf [ process-id ] [ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange |
iftxretransmit | lsdbapproachoverflow | lsdboverflow | maxagelsa | nbrstatechange |
originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt | virifstatechange | viriftxretransmit |
virnbrstatechange ] *
undo snmp-agent trap enable ospf [ process-id ] [ ifauthfail | ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit | lsdbapproachoverflow | lsdboverflow | maxagelsa |
nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt | virifstatechange |
viriftxretransmit | virnbrstatechange ] *
View
System view
Default level
3: Manage level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
ifauthfail: Interface authentication failure information.
ifcfgerror: Interface configuration error information.
ifrxbadpkt: Information about error packets received.
ifstatechange: Interface state change information.
iftxretransmit: Packet receiving and forwarding information.
lsdbapproachoverflow: Information about cases approaching LSDB overflow.
lsdboverflow: LSDB overflow information.
maxagelsa: LSA max age information.
nbrstatechange: Neighbor state change information.
originatelsa: Information about LSAs originated locally.
vifauthfail: Virtual interface authentication failure information.
vifcfgerror: Virtual interface configuration error information.
virifauthfail: Virtual interface authentication failure information.
virifrxbadpkt: Information about error packets received by virtual interfaces.
virifstatechange: Virtual interface state change information.
viriftxretransmit: Virtual interface packet retransmission information.
virnbrstatechange: Virtual interface neighbor state change information.
Description
Use snmp-agent trap enable ospf to enable the sending of SNMP traps for a specified OSPF
process. If no process is specified, the feature is enabled for all processes.
Use undo snmp-agent trap enable ospf to disable the feature.
By default, this feature is enabled.
See Network Management and Monitoring Command Reference for related information.
120