snmp-agent trap enable fc-fabric
Use snmp-agent trap enable fc-fabric to enable SNMP notifications for the fabric module.
Use undo snmp-agent trap enable fc-fabric to disable SNMP notifications for the fabric module.
Syntax
snmp-agent trap enable fc-fabric [ domain-id-change | fabric-change ] *
undo snmp-agent trap enable fc-fabric [ domain-id-change | fabric-change ] *
Default
All SNMP notifications for the fabric module are disabled.
Views
System view
Predefined user roles
network-admin
Parameters
domain-id-change: Specifies domain ID changes.
fabric-change: Specifies fabric changes.
Usage guidelines
If you do not specify any keywords, this command enables all SNMP notifications for the fabric module.
After you enable SNMP notifications for domain ID changes, the switch generates a notification when its
domain ID changes in a VSAN. The notification includes the VSAN ID, the switch WWN, and the new
domain ID.
After you enable SNMP notifications for fabric changes, the switch generates a notification when it sends
or receives a BF or RCF frame for fabric reconfiguration. The notification includes the VSAN ID for fabric
reconfiguration.
Generated notifications are sent to the SNMP module. For more information about SNMP notifications,
see Network Management and Monitoring Configuration Guide.
Examples
# Enable SNMP notifications for domain ID changes.
<Sysname> system-view
[Sysname] snmp-agent trap enable fc-fabric domain-id-change
# Enable SNMP notifications for fabric changes.
<Sysname> system-view
[Sysname] snmp-agent trap enable fc-fabric fabric-change
snmp-agent trap enable fc-name-service
Use snmp-agent trap enable fc-name-service to enable SNMP notifications for the name service module.
Use undo snmp-agent trap enable fc-name-service to disable SNMP notifications for the name service
module.
71