Change The Default Lan Subnet - Digi IX14 User Manual

Initial configuration
APN: Enter the access point name to use to connect to the cellular network.
IP version: Select the IP version. The default is Automatic.
Authentication method: Select the authentication method. The default is None.
3. Click Save.

Change the default LAN subnet

You can change the Digi IX14 default LAN subnet—192.168.2.1/24—to any range of private IPs. The
local DHCP server range will also change to the range of the LAN subnet.
To change the LAN subnet:
1. From the menu, click Configuration.
2. Open Network > Interfaces > LAN.
3. Open the IPv4 option. The Address field contains the range of available IPs you can assign. You
must also specify the subnet mask.
4. Click Save.
Digi IX14 User Guide

Change the default LAN subnet

34