Editing Data Instances - ABB OmniCore S Series Operating Manual

6 Programming and testing

6.5.3 Editing data instances

6.5.3 Editing data instances
Overview
This section describes how to view data instances in the RAPID Data window. It
also details how to edit, delete, change declaration of, copy, and define a data
instance.
For the data types tooldata, wobjdata and loaddata also see sections
on page
Viewing and editing data instances
This section details how to view the available instances of a data type.
Deleting a data instance
Use the following procedure to delete a data instance.
Continues on next page
114
116, Work objects on page 133
1 On the start screen, tap Code, and then select RAPID Data from the menu.
2 Tap the data instance type for which the data instances need to be viewed
or edited. For example, tooldata.
The data instances for the selected type are displayed.
3 Tap on the data instance that needs to be edited.
4 Tap the Declaration tab, Initial Value, and Current Value tab and edit the
parameters according to your requirement.
5 Tap Apply.
The changes to the selected data instance are saved.
Note
If the value of a persistent variable is changed at any point in a running program,
the Code Editor will still show the old value until the program stops. The RAPID
Data view, however, always shows the current value of persistent variables. See
Persistent declaration in the Technical reference manual - RAPID Overview for
further information.
1 On the start screen, tap Code, and then select RAPID Data from the menu.
2 Tap the data instance type for which you need to delete the data instance.
For example, tooldata.
The data instances for the selected type are displayed.
3 Tap Delete on the context menu for the data instance that you want to delete.
4 Tap Yes.
The selected data instance is deleted.
© Copyright 20192020 ABB. All rights reserved.
or Payloads on page 145.
Operating manual - OmniCore
3HAC065036-001 Revision: E
Tools