Deleting A Payload - ABB OmniCore S Series Operating Manual

6.8.5 Deleting a payload

Deleting a payload
Use the following procedure to delete a payload:
Operating manual - OmniCore
3HAC065036-001 Revision: E
1 On the start screen, tap Calibrate, and then select Payload from the menu.
2 The Payload page displays the available work objects.
3 Tap Delete on the context menu for the payload that you want to delete.
4 The Confirm deletion of data window is displayed.
5 Tap Delete.
The selected payload is deleted.
CAUTION
A deleted tool, work object or payload cannot be recovered, and all related data
will be lost. If the tool, work object or payload is referenced by any program,
those programs cannot run without changes.
If you delete a tool you cannot continue the program from the current position.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.8.5 Deleting a payload
151