Connection Log - ABB OmniCore S Series Operating Manual

10.9 Connection log

Overview
This option is used to save the current connection state of the connectivity module.
Procedure
Use the following procedure to save the current connection state of the connectivity
module:
Operating manual - OmniCore
3HAC065036-001 Revision: E
10 Install, update, restart, and other configuration
Note
Connection log is available only for Connected Services Gateway 3G and Wi-Fi
but not for Wired.
1 On the start screen, tap Settings, and then Backup & Recovery.
2 On the left sidebar tap Connection log.
The Connection log page is displayed and the logs are displayed on a
window.
Note
Tap on the refresh button to update the logs.
3 Tap Export.
4 If required, in the File Name field edit the name of the file.
5 If required, to change the storage path, in the Folder Name field tap Browse
and select the required path.
6 Tap Create.
The current connection state of the connectivity module is saved in the
selected path.
© Copyright 20192020 ABB. All rights reserved.
10.9 Connection log
229