Filtering Data - ABB OmniCore S Series Operating Manual

2 Navigating and handling the FlexPendant

2.4.4 Filtering data

2.4.4 Filtering data
Filtering data
In several of the FlexPendant menus you can use filtering. This can be useful when
you are looking at instances of a data type when there are many instances available.
By filtering instances starting with a specific character for example, the number of
items can be greatly reduced.
Depending on the type of data, you can filter data either alphabetically or
numerically.
xx2000000926
48
Note
When filtering I/O signals there are more options than other types of data. For
example, you can filter data by Name or Type
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E