ABB OmniCore S Series Operating Manual page 91

Renaming a loaded program
This section describes how to rename a loaded program.
Deleting a program
This section describes how to delete a program.
Operating manual - OmniCore
3HAC065036-001 Revision: E
3 Use the suggested program name or type a new name in the File Name field.
xx1900000223
4 Tap Save.
The program is saved.
1 On the start screen, tap Code, and then select Modules from the menu.
2 On the Context menu, tap Rename.
3 In the Enter New Name field, type a new name for the selected program.
xx1900000224
4 Tap Apply.
The program is renamed.
Note
You can only delete a loaded program.
1 On the start screen, tap Code, and then select Modules from the menu.
2 On the Context menu, tap Delete.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.3.1 Handling of programs
Continues on next page
Continued
91