Overview Of This Manual - ABB OmniCore S Series Operating Manual

Overview of this manual

About this manual
This manual contains instructions for operation of OmniCore controller based
robots.
Usage
This manual should be used during operation.
Some actions that are more advanced, or not used in the daily operation, are
described in Operating manual - Integrator's guide OmniCore.
Who should read this manual?
This manual is intended for:
Prerequisites
The reader should:
References
Documentation referred to in the manual, is listed in the table below.
Document name
Product manual - OmniCore C30
Operating manual - Integrator's guide OmniCore
Operating manual - RobotStudio
Application manual - Controller software OmniCore
Technical reference manual - System parameters
Application manual - SafeMove
Operating manual - OmniCore
3HAC065036-001 Revision: E
Note
It is the responsibility of the integrator to provide safety and user guides for the
robot system.
Note
Before any work on or with the robot is performed, the safety information in the
product manual for the controller and manipulator must be read.
• operators
• product technicians
• service technicians
• robot programmers
• Have read and understood the safety instructions in the product manuals for
the robot.
• Be trained in robot operation.
© Copyright 20192020 ABB. All rights reserved.
Overview of this manual
Document ID
3HAC060860-001
3HAC065037-001
3HAC032104-001
3HAC066554-001
3HAC065041-001
3HAC066559-001
Continues on next page
9