Flexpendant Applications - ABB OmniCore S Series Operating Manual

2 Navigating and handling the FlexPendant

2.2.3 FlexPendant applications

2.2.3 FlexPendant applications
Code
The Code application is used to create new programs, modify existing programs,
view and edit RAPID data, and so on.
Feature
Create new programs, edit existing
programs
View and edit RAPID modules and
RAPID routines
View and edit RAPID data (program
data)
Debug Options
PP to main, cursor to program
pointer, goto position, call routine,
cancel routine, check program, view
system data, next move instruction
Teach position (ModPos)
Check for syntactic and semantic
error
If the option Program Package is not selected then programs must be created and
edited using RobotStudio.
Jog
The Jog application is used to jog the ABB industrial robot using an intuitive touch
based user interface or using a joystick.
Feature
Joystick jog
Touch jog
Align tool
Lead-through
Jog supervision
GoTo (jog to target)
3D visualization
Continues on next page
34
Limited App
Package [3120-1]
Limited App
Package [3120-1]
© Copyright 20192020 ABB. All rights reserved.
Essential App
Package [3120-2]
Essential App
Package [3120-2]
✓ ✓
✓
✓
✓
✓ ✓
✓
✓ ✓
Operating manual - OmniCore
3HAC065036-001 Revision: E
Program Pack-
age [3151-1]
✓
✓
✓
✓
✓
✓
Program Pack-
age [3151-1]