Messages On The Flexpendant - ABB OmniCore S Series Operating Manual

2 Navigating and handling the FlexPendant

2.4.2 Messages on the FlexPendant

2.4.2 Messages on the FlexPendant
Overview of messages
The FlexPendant displays messages from the system. These can be status
messages, error messages, program messages, or requests for action from the
user. Some require actions, and some are plain information.
Event log messages
The event log messages are messages from the RobotWare system about system
status, events, or errors.
How to work with the event log messages is described in section
event log on page
manual - Event logs for RobotWare 7.
System messages
Some messages sent out by the system are not from the event log. They can come
from other applications, such as RobotStudio.
To be able to change configurations and settings in the system from RobotStudio,
the user must request write access. This generates a message on the FlexPendant
where the operator can grant or deny access. The operator can at any time decide
to withdraw the write access.
How to request access and work with RobotStudio is described in Operating
manual - RobotStudio.
Program messages
RAPID programs can send out messages to the Operator window, for example,
while running a service routine. See,
How to generate program messages is described in Technical reference
manual - RAPID Instructions, Functions and Data types.
46
215. All messages are also described in Technical reference
© Copyright 20192020 ABB. All rights reserved.
Messages window on page
Operating manual - OmniCore
3HAC065036-001 Revision: E
Handling the
26.