ABB OmniCore S Series Operating Manual page 153

Operating manual - OmniCore
3HAC065036-001 Revision: E
If Forward or Backward was pressed, the program is executed step-by-step
by alternately releasing and pressing the Forward/Backward button.
Note
The thumb button must be pressed and held to continue running the
program. If the button is released, the program execution will stop
immediately.
5 If the three-position enabling device is released, intentionally or by accident,
the procedure must be repeated to enable running.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.9.1 Using the hold-to-run function
Continued
153