ABB OmniCore S Series Operating Manual page 94

6 Programming and testing
6.3.2 Handling of modules
Continued
Saving a module
This section describes how to save a module.
Continues on next page
94
3 Navigate and select the module from the location where it is saved. Tap
Load.
xx1900000227
The selected module is loaded.
1 On the start screen, tap Code, and then select Modules from the menu.
2 Tap Save as on the Context menu for the module.
3 The Save Module as window is displayed:
xx1900000229
Tap and select a location for saving the module.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E