2 Navigating and handling the FlexPendant
2.4.7 Logging on and off
Continued
Using the Settings application
Handling users and authorization levels
Read more on how to add users or set the authorization in Operating
manual - RobotStudio.
52
The Logout/Restart page is displayed.
2 In the Current User section tap Logout.
The current active user is logged off from the controller and the Log in to
controller window is displayed.
1 On the start screen, tap Settings.
The Settings page is displayed.
2 At the bottom of the Settings page tap Logout.
The current active user is logged off from the controller and the Log in to
controller window is displayed.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E