ABB OmniCore S Series Operating Manual page 214

8 Handling inputs and outputs, I/O
8.5 I/O devices
Continued
Upgrading firmware
You can upgrade the firmware of I/O device of type EtherNet IP.
Use the following procedure to upgrade the firmware.
214
1 On the start screen, tap I/O, and then select I/O Devices from the menu.
2 Select Firmware Update in the context menu for an EtherNet IP I/O device.
The I/O Modernization window is displayed with the details of the firmware
upgrade.
Note
The Firmware upgrade option is available only for the network type EtherNet
IP.
3 Tap Browse and select the firmware from the location it is stored.
4 Tap Upgrade.
The firmware for the selected EtherNet IP I/O device is upgraded.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E