Copying A Payload - ABB OmniCore S Series Operating Manual

6 Programming and testing

6.8.3 Copying a payload

6.8.3 Copying a payload
Procedure
Use the following procedure to create the copy of a workobject:
148
1 On the start screen, tap Code, select RAPID Data from the menu, and tap
the loaddata data instance type.
The data of type loaddata are displayed.
Note
You can also create the copy of a loaddata from Calibrate. For this, on the
start screen, tap Calibrate, select Payload from the menu, and continue
with the following steps.
2 Tap Copy on the context menu for the loaddata that you want to copy.
A confirmation window is displayed.
3 Tap OK.
A copy of the selected loaddata is created.
Note
The copied loaddata has the same values as the original, but the name is unique.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E