ABB OmniCore S Series Operating Manual page 195

Once a dashboard is created you need to associate cards to it. For more details,
see
Assigning cards to dashboard
Use the following procedure to associate cards to a dashboard:
Assigning a card to multiple dashboards
You can assign a card to a multiple dashboards:
Operating manual - OmniCore
3HAC065036-001 Revision: E
Assigning cards to dashboard on page 195
1 On the start screen, tap Operate, and then select Define Dashboards from
the menu.
2 The Define Dashboards page is displayed. The current available dashboards
are displayed on this page.
3 Tap on a dashboard for which cards needs to be associated.
The Edit Dashboard page is displayed.
4 Navigate to the Associated Cards section and tap Associate.
The Select Card(s) page is displayed with a list of available cards.
5 Select the cards that needs to be associated to the selected Dashboard.
Note
You can associate a maximum of 6 cards in each dashboard.
6 Tap OK.
The Edit Dashboard page is displayed with the list of selected dashboards.
7 Tap Apply.
The selected cards are associated with the Dashboard.
1 On the start screen, tap Operate, and then select Define Cards from the
menu.
2 The Define Cards page is displayed. The current available cards are displayed
on this page.
3 Tap on a card that needs to be associated with dashboards.
The Edit Card page is displayed.
4 Navigate to the Associated Dashboards section and tap Associate.
The Select Dashboards page is displayed with a list of available dashboards.
5 Select the dashboards that needs to be associated with the selected card.
Note
You can associate a maximum of 6 cards to each dashboard. So if a
dashboard already has 6 associated cards then you cannot associate the
selected card to that dashboard.
6 Tap OK.
The Edit Card page is displayed with the list of associated dashboards.
7 Tap Apply.
© Copyright 20192020 ABB. All rights reserved.
7 Running in production
7.3 Managing Dashboards
Continued
Continues on next page
195