ABB OmniCore S Series Operating Manual page 43

Operating manual - OmniCore
3HAC065036-001 Revision: E
• Press/Release - sets the signal value to 1 while the key is pressed
(note that an inverted signal will be set to 0).
• Pulse - the signal value pulses once.
9 If the type System is selected:
• Tap the Allow in auto list to select if the function is also allowed in
automatic operating mode.
Note
The value Move PP to Main is selected in the Key Pressed list.
10 Tap Apply.
The selected key is configured.
11 Configure the other keys, if needed.
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.3.6 Changing programmable keys
Continued
43