ABB OmniCore S Series Operating Manual page 115

Copying a data instance
Use the following procedure to create the copy of a data instance.
Operating manual - OmniCore
3HAC065036-001 Revision: E
CAUTION
A deleted tool, work object, or payload cannot be recovered, and all the related
data will be lost. If the tool, work object, or payload is referenced by any program,
those programs cannot run without changes.
If you delete a tool you cannot continue the program from the current position.
1 On the start screen, tap Code, and then select RAPID Data from the menu.
2 Tap the data instance type for which you need to create a copy of the data
instance. For example, tooldata.
3 Tap Copy on the context menu for the data instance that you want to copy.
A confirmation window is displayed.
4 Tap OK.
A copy of the selected data instance is created.
Note
The copied data instance has the same values as the original, but the name is
unique.
© Copyright 20192020 ABB. All rights reserved.
6 Programming and testing
6.5.3 Editing data instances
Continued
115