ABB OmniCore S Series Operating Manual page 26

2 Navigating and handling the FlexPendant
2.2.2 Status bar
Continued
Messages window
The operator window displays messages from the program. With Multitasking
installed, all tasks' messages are displayed in the same operator window. If a
message requires action, for example a service routine message, then a separate
window for that task is displayed.
The operator window is opened by tapping the Messages button on the status bar.
The following illustration shows an example of an operator message:
xx2000000866
QuickSet window
When you tap on the QuickSet button the QuickSet window is displayed. The
QuickSet window has the following tabs:
Continues on next page
26
• Control
• Jog
• Execution
• Visual
• Information
• ABB Ability
• Logout/Restart
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E