Configuring The Interface Language - ABB OmniCore S Series Operating Manual

2 Navigating and handling the FlexPendant

2.3.4 Configuring the interface language

2.3.4 Configuring the interface language
Changing language
The FlexPendant user interface supports English, German, French, and Chinese
languages. The default language is English.
Use the following procedure to change the interface language on the FlexPendant.
40
Note
When you switch to another language, all the buttons, menus, and dialogs will
use the new language. But the interface language of RAPID instructions, variables,
system parameters, and I/O signals is not affected.
1 On the start screen, tap Settings.
2 Tap Time & Language.
3 On the left sidebar tap Language.
4 Tap on the desired language button.
5 Tap Apply.
The Change language confirmation window is displayed.
6 Tap Yes.
The FlexPendant is restarted and the language of the user interface is
changed.
© Copyright 20192020 ABB. All rights reserved.
Operating manual - OmniCore
3HAC065036-001 Revision: E