ABB OmniCore S Series Operating Manual page 33

Logout/Restart
The Logout/Restart tab allows you to disconnect the FlexPendant, restart the
controller and FlexPendant, and so on.
Button/Section
Current User
Controller
FlexPendant
Operating manual - OmniCore
3HAC065036-001 Revision: E
2 Navigating and handling the FlexPendant
Description
Displays the name of the current logged in user.
Log out: Logs out the current user from the FlexPendant.
Restart: This is used to restart the controller.
Detach FlexPendant: This is used to detach the FlexPendant from
the controller without stopping the current program execution. For
more details, see
page 205.
Restart FlexPendant: This is used to restart the FlexPendant.
Restart Application: This is used to restart a FlexPendant applica-
tion.
Exit Application: This is used to exit a FlexPendant application.
© Copyright 20192020 ABB. All rights reserved.
Connecting and detaching a FlexPendant on
2.2.2 Status bar
Continued
33