Identity Settings - ABB OmniCore S Series Operating Manual

2.3.5 Identity settings

Configuring the identity settings
You can define a name for the robot system according to your requirement.
Use the following procedure to configure the name of the robot system.
Operating manual - OmniCore
3HAC065036-001 Revision: E
1 On the start screen, tap Settings.
2 Tap System.
3 In the Robot System Name field tap Edit.
4 Type or update the name of the robot.
5 Tap Apply.
The changes are saved and the name of the robot system is updated.
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.3.5 Identity settings
41